HEMAISHI ELECTRONIC TECHNOLOGY

Serve customers in medical, industrial control, automobile, military and other fields
CONTACTSMr. Peng
150-1342-1681
PRODUCT DISPLAY
Product Display
SMT chip processing
PCBA processing
Insert and post weld
Electronic product assembly
Established in July 2015 with a registered capital of 1000W RMB, Dongguan hemaisi Electronic Technology Co., Ltd. is specialized in providing low volume and variety electronic manufacturing services, and is committed to serving high-end electronic customers in medical, industrial control, automobile, military and other fields.
The company is located in Hongxin science and Technology Park, Dongkeng Town, Dongguan City
The second and third floors of building A1 cover an area of 3200 square meters. At present, there are three SMT lines (4-6 SMT lines can
Hemaishi Electronic Technology Co., Ltd
+
RMB 10 million registration
Company area 3200㎡
100 employees
Nissan 300W
w
MES information management
MES information management
Hems Quality system
Humidity control system
ESD protection
WMS warehouse management system
Hems Six core competitiveness
MES生产信息化管理系统:2017年导入
为企业提供制造数据管理、计划排产管理、生产调度管理、质
量管理、生产效率管理、不合格品管理
MES生产信息化管理系统:2017年导入
为企业提供制造数据管理、计划排产管理、生产调度管理、质
量管理、生产效率管理、不合格品管理
合迈仕质量体系依据QSR820和ISO13485建立。
完善的流程设计满足FDA审核要求。
温湿度控制范围:20℃-26 ℃;RH30%-RH60%
温度控制系统:全中央空调;湿度控制系统:全自动湿度控制设备

ESD 参考标准:ANSI/ESD S20.20-2007
HeMS ESD 标准:QG221 ESD控制指南1.0
HeMS 五大静电防护保证系统
WMS仓储管理系统:2016年导入
为企业的物料管理提供仓位管理、库存控制、库存预警、呆滞料管理、成品管理、出库管理、排产欠料查询、物料信息管理
MES production information management system: introduced in 2017
Provide manufacturing data management, production scheduling management, production scheduling management, quality management, production efficiency management, unqualified product management for enterprises

MES production information management system: introduced in 2017
Provide manufacturing data management, production scheduling management, production scheduling management, quality management, production efficiency management, unqualified product management for enterprises

The quality system of Hermes was established according to qsr820 and ISO13485.
Perfect process design to meet FDA audit requirements.

Temperature and humidity control range: 20 ℃ - 26 ℃; rh30% - rh60%
Temperature control system: full central air conditioning; humidity control system: full automatic humidity control equipment


ESD reference standard: ANSI / ESD S20.20-2007
Hems ESD standard: qg221 ESD control guide 1.0
Five electrostatic protection assurance systems of hems
WMS warehouse management system: introduced in 2016
It provides warehouse management, inventory control, inventory early warning, dead material management, finished product management, stock out management, production scheduling query, material information management for enterprise material management
SIX CORE COMPETITIVENESS
1
2
3
4
5
6
Dongguan hems Electronic Technology Co., Ltd
Design, assembly and test service provider
0769-81013289
150-1342-1681 Mr. Peng
Contact Hotline
Equipment display
EQUIPMENT DISPLAY
BGA repair table
BGA repair table
Curve divider
Curve divider
Spraying equipment
Spraying equipment
Wave soldering(JTNK-350II)
Wave soldering(JTNK-350II)
Reflow soldering(JT-AS1000)
Reflow soldering(JT-AS1000)
Mounter(JUKI3010)
Mounter(JUKI3010)
Crimping machine
Crimping machine
Mounter(JUKI3020)
Mounter(JUKI3020)
Printing machine(MPM125)
Printing machine(MPM125)
Cutter distributor
Cutter distributor
Factory strength
FACTORY STRENGTH
News and information
THE NEWS

2021

01-25

在SMT贴片加工过程中,锡膏和助焊剂会产生残留物质,残留物中包含有有机酸和可分解的电离子,其中有机酸具有腐蚀作用,电离子残留在焊盘还会引起短路,而且这些残留物在PCBA板上是非常脏的,而且不符合顾客对产品清洁度的要求。所以,对PCBA板进行...

2021

01-25

在贴片厂待过的朋友们都知道,一般PCB在贴片之前都会放到烤箱进行烘烤(特殊板材除外),这样做有什么用呢?接下来小编就为大家一一解析。在SMT贴片加工的的生产过程中有很多细节需要贴片加工厂去注意并落实到加工生产过程中去,在加工之前对长期存放的...

2021

01-25

现在SMT贴片工艺日益被人所熟知,贴片加工厂在做smt加工时,更多的是把主要注意力放在了生产工艺,制造流程上面,而却忽略了工厂的环境。其实只有在兼顾加工工艺流程的同时将整个加工环境调整好,SMT加工生产线的高效工作才能得到保障。      ...

2021

01-25

很多贴片工厂在生产中,经常会碰到一些品质不良,作为SMT加工工厂的一员,根据经验,总结有几点最容易发生问题的封装与问题(根据难度):(1) QFN:最容易产生的不良现象是桥连、虚焊(开焊)。(2)密脚元器件:如0.65mm以下的SOP QF...

2021

01-25

随着社会对信息化、智能化的要求不断进步,而且简直渗透到各行各业,正如文中提到的,已经很难找到不运用FPC柔性线路板以及FPC组件的略微复杂的电子产品了。国家也将进一步加大在各范畴电子信息化建造的投资,加大范畴电子信息化建造脚步的加快,必定带...

2021

01-25

在表面贴装工艺的回流焊接工序中,贴片元件会产生因翘立而脱焊的缺陷,人们形象的称之为”竖碑”现象(即曼哈顿现象)“立碑”现象发生在CHIP元件(如贴片电容和贴片电阻)的回流焊接过程中,元件体积越小越容易发生。其产生原因是,元件两端焊盘上的锡膏...
total 1 page
topage
Cooperative customers
CUSTOMER
Online Message
mailbox:stone.peng@hemselec.com
         don@hemselec.com address:3rd floor, building A1, Hongxin science and Technology Park, second industrial zone, Jiaoshe village, Dongkeng Town, Dongguan City, Guangdong Province
Dongguan hems Electronic Technology Co., Ltd
(Scan wechat)
Contact information
Telephone:0769-81013289
Fax:0769-81013289
mobile phone:150-1342-1681 Mr. Peng                            150-1921-0512 Mr. Nie